Chimney Work in Pacific Palisades, From the Firebox to the Cap

Ask Which Service Fits

Chimney Sweep

Creosote and soot out of the flue and smoke chamber, then a look at each part of the structure while it is clean.

This part in detail

Chimney Inspection

Level 1, 2 or 3 to NFPA 211, read from the firebox up, with a note on each part of the chimney.

This part in detail

Chimney Repair

Crown, mortar, liner and crack repair, done in the order the structure needs it.

This part in detail

Fireplace Inspection

Firebox floor and walls, refractory panels, damper and smoke chamber: the base the rest of the chimney sits on.

This part in detail

Fireplace Repair

Firebox, refractory and damper repair, so the base of the chimney is sound before the flue above it is used.

This part in detail

Chimney Level 2 Inspection

The camera inspection for a sale, a quake or a nearby fire. It shows the flue tiles from inside the stack.

This part in detail

Chimney Cap Installation

Stainless caps with spark arrestor mesh, set on a crown we have checked first.

This part in detail

Chimney Flashing Repair

Step and counter flashing where the stack meets the roof, the joint where water most often gets in.

This part in detail

Chimney Masonry Repair

Tuckpointing and brick replacement with mortar matched to the old joints. This is the core of our work.

This part in detail

Chimney Rebuilds

Partial or full rebuilds when the stack can no longer be repaired, built back course by course to code.

This part in detail

Fireplace Cleaning

Ash, soot and smoke stain cleaned from the firebox, hearth and surround.

This part in detail

Gas Fireplace Cleaning

Burner, pilot, logs and glass serviced, and the vent checked from the unit to the cap.

This part in detail

Gas Fireplace Repair

Pilot, thermocouple, valve and ignition faults found and fixed on gas sets and inserts.

This part in detail

Fireplace Remodel

New surrounds, mantels and hearths, built on a firebox we have checked for code first.

This part in detail

Fireplace Inserts

Gas, wood or electric inserts fitted to the masonry firebox, with the liner and venting.

This part in detail

Pellet Stove Repair

Auger, igniter, blower and control board repair, plus the vent pipe.

This part in detail

Wood Stove Repair

Baffles, firebrick, gaskets and combustors, and the stovepipe up to the chimney connection.

This part in detail

Gas Logs

Vented or ventless log sets sized to the firebox, with the gas line and damper clamp.

This part in detail

Start From the Base

If you are not sure what the chimney needs, book the sweep and the base-to-crown inspection first. The report says which service comes next.

Call (424) 266-4564

Cornerstone Chimney Contractors

Walking the chimney from the hearth to the crown

Four pages for people who meet a chimney through a sale, a referral, a building or a repair list. Each one goes part by part, the way a mason walks a job.

Call (424) 266-4564