A warm and inviting living room with a fireplace and elegant decor in Estonia.

Pacific Palisades Chimneys, Read From the Firebox to the Crown

Request a Service Call

Tell us what you need and we will call you back shortly.

Firebox to crownSame-day available
Read From Firebox to Crown
A Note on Each Part
Masonry and Tuckpointing
NFPA 211 Inspections
7 AM to 7 PM Daily
Pacific Palisades First
Read From Firebox to Crown
A Note on Each Part
Masonry and Tuckpointing
NFPA 211 Inspections
7 AM to 7 PM Daily
Pacific Palisades First
What We Do

Chimney work in Pacific Palisades, from the firebox to the cap.

Sweeps and inspections first, then masonry, liner and fireplace work on the parts that need it. Each service below works on one part of the structure.

01

Chimney Sweep

Book a chimney sweep in Pacific Palisades and get a full condition check in the same visit, same-day scheduling across Westside / Malibu Coast.

Complete creosote and soot removal
Smoke chamber deep cleaning
HEPA-filtered vacuum running the whole visit
Damper inspection and cleaning included
How we do this part
02

Chimney Inspection

Schedule a chimney inspection in Pacific Palisades: every component checked from firebox to crown, with a same-day report and a sweep optional in the same visit.

Level 1: Visual inspection for annual maintenance
Level 2: Camera inspection for real estate or damage assessment
Level 3: Invasive inspection for suspected hidden damage
Detailed digital photo report delivered after every visit
How we do this part
03

Chimney Repair

Chimney repair in Pacific Palisades starts with finding where water gets in, then we fix crown to firebox with mortar and brick matched to your home.

Mortar joint repair and tuckpointing
Chimney crown repair and replacement
Flue liner repair and relining
Chimney crack repair and sealing
How we do this part
04

Fireplace Inspection

Fireplace inspection in Pacific Palisades walks every accessible hearth component before small wear becomes a safety issue, on-site photos included.

Full firebox and refractory panel inspection
Damper operation and sealing test
Smoke shelf and smoke chamber evaluation
Hearth extension and surround condition check
How we do this part
05

Fireplace Repair

Fireplace repair in Pacific Palisades follows what your inspection report found, fixed with the right materials and documented when finished.

Refractory brick and panel replacement
Damper repair and replacement
Smoke shelf and smoke chamber repair
Hearth tile and surround restoration
How we do this part
06

Chimney Level 2 Inspection

Level 2 chimney inspection in Pacific Palisades: full camera scan of the flue interior, same-day scheduling, a photo report for the sale.

360° video camera scan of entire flue interior
Full inspection of accessible portions per NFPA 211
Booked around escrow dates for a home sale
Required after chimney fire, storm, or seismic event
How we do this part
07

Chimney Cap Installation

Chimney cap installation in Pacific Palisades: stainless steel caps sized to your flue, spark arrestor and mesh included, same-day installs available.

Stainless steel and copper cap options
Spark arrestor mesh included on every cap
Custom sizing for multi-flue chimneys
Mesh sized to keep animals and debris out
How we do this part
08

Chimney Flashing Repair

Chimney flashing repair in Pacific Palisades stops leaks at the roofline with code-compliant materials matched to your existing roof.

Step flashing and counter flashing repair
Cricket installation for wide chimneys
Lead and aluminum flashing options
Sealant application at all chimney-to-roof joints
How we do this part
09

Chimney Masonry Repair

Masonry repair in Pacific Palisades: tuckpointing, brick replacement, and mortar restoration, color-matched and sealed against water when the job is done.

Tuckpointing and repointing services
Brick replacement with color matching
Mortar joint restoration (Type N and Type S)
Waterproofing sealant applied after repair
How we do this part
10

Chimney Rebuilds

Chimney rebuilds in Pacific Palisades, partial or full, handled start to finish with permits and code compliance built into the process.

Partial rebuild (above roofline)
Full chimney reconstruction
Earthquake damage repair and retrofit
California building code compliance
How we do this part
11

Fireplace Cleaning

Fireplace cleaning in Pacific Palisades covers the firebox, hearth, and glass, whether you burn wood or run gas.

Firebox ash and soot removal
Glass door cleaning and gasket check
Hearth stone and surround cleaning
Smoke stain removal from masonry
How we do this part
12

Gas Fireplace Cleaning

Gas fireplace cleaning in Pacific Palisades, annual service for the burner, pilot, thermocouple, logs, and glass.

Pilot assembly and thermocouple cleaning
Ceramic log inspection and repositioning
Burner port cleaning for even flame
Glass panel cleaning and gasket inspection
How we do this part
13

Gas Fireplace Repair

Gas fireplace repair in Pacific Palisades: we diagnose why it will not light or stay lit, then fix the actual part.

Pilot light and ignition system repair
Thermocouple and thermopile replacement
Gas valve diagnosis and replacement
Direct-vent and ventless unit service
How we do this part
14

Fireplace Remodel

Fireplace remodel in Pacific Palisades starts with a code check on the existing firebox, then surrounds, mantels, or a full hearth redesign.

Stone and tile surround installation
Custom mantel design and fabrication
Gas or electric insert conversion
Hearth extension and floor protection
How we do this part
15

Fireplace Inserts

Fireplace insert installation in Pacific Palisades: gas, wood, or electric, fitted into your existing masonry firebox with the liner and venting it needs.

Gas, wood, and electric insert options
Existing masonry firebox compatibility check
Stainless steel liner installation included
Gas line connection for gas inserts
How we do this part
16

Pellet Stove Repair

Pellet stove repair in Pacific Palisades for auger jams, igniter failures, blower problems, and control board issues, all major brands.

Auger motor and feed system repair
Igniter replacement for all brands
Combustion and convection blower service
Control board diagnosis and replacement
How we do this part
17

Wood Stove Repair

Wood stove repair in Pacific Palisades: baffle plates, firebrick, gaskets, and catalytic combustors, replaced to restore burn efficiency.

Baffle plate replacement
Firebrick and refractory repair
Door gasket and glass replacement
Catalytic combustor service
How we do this part
18

Gas Logs

Gas log installation in Pacific Palisades: vented or ventless sets, sized and connected to fit your room and fireplace.

Vented and ventless gas log options
BTU sizing for room and firebox dimensions
Gas line connection with shut-off valve
Damper clamp installation for vented sets
How we do this part
Smiling couple discussing real estate plans with advisor in modern, cozy setting.

How We Work

Sweep first, then the masonry, read from the base up.

How We Read a Chimney

The structure first, part by part, from the firebox to the crown.

Cornerstone Chimney Contractors works from Pacific Palisades and treats a chimney as what it is: a column of masonry that has to stand and keep water out. We sweep first, then read it from the firebox to the crown, and write down what each part needs.

The order matters. Soot hides cracks, so the sweep comes first. Then the firebox and hearth, the damper and smoke chamber, the liner, and last the stack, crown, flashing and cap on the roof.

Each part gets its own line: sound, needs repair, or needs rebuilding. Since the 2025 fire, that line is often what a Palisades owner needs to decide whether a standing chimney can be kept.

Firebox to crown, in that order

Visits 7 AM to 7 PM, every day

A written note on each part

Repairs planned in a mason's order

Why the Order Matters

A crown repair on a stack with a cracked liner is work done in the wrong place.

So we read the whole column before suggesting work on any one part of it.

The Structure Comes First

A chimney is a column of masonry that has to stand up and keep water out. We look at whether it is sound before we look at how it looks.

Pacific Palisades Is Home

We work from the Palisades, then Brentwood, Santa Monica, Malibu and Beverly Hills. Since the 2025 fire, much of that work is reading chimneys that are still standing.

Base to Crown, Every Time

Every inspection follows the same order, from the firebox to the cap, to NFPA 211, so nothing between the hearth and the roof is skipped.

Repair What Can Be Repaired

If repointing or a new crown will hold, we say so before anyone talks about a rebuild. Original brick stays where it is sound.

How It Works

From the firebox up to the crown

Every visit runs in the same order, the way a mason reads a chimney: clean it, read it part by part, write it down.

01

Tell Us About the Structure

Call or send the form with the kind of fireplace you have, the last time it was swept, and anything you have noticed: a crack in the crown, a smell, a stain on the ceiling near the chimney. If the house is in Pacific Palisades or was near the 2025 fire, say so.

02

Sweep the Flue First

We clean the flue, smoke chamber and firebox before inspecting, because creosote and soot hide cracks in tile and mortar. The sweep runs with a HEPA vacuum and drop cloths at the hearth.

03

Read It From the Base Up

Firebox and hearth, damper and smoke chamber, flue liner, then the stack, crown, flashing and cap on the roof. A camera goes up the flue whenever the liner calls for a closer look, or for a sale, a quake or a nearby fire.

04

A Note for Each Part

You get photos and a written note on each part of the chimney: sound, needs repair, or needs rebuilding. Each note names the part, so the crown or the smoke chamber is easy to find in the photos.

05

Repairs in a Mason's Order

If work is needed, we plan it the way the structure needs it, the crown and water entry before cosmetic joints, the liner before the fireplace goes back in use. You decide what goes ahead and when.

Call (424) 266-4564

Visits 7 AM to 7 PM, every day of the week.

Where We Work

Pacific Palisades first, then Brentwood, Santa Monica and Malibu

142 cities, each with its own page on what we check first there and what the masonry tends to show.

Pacific Palisades

our home town, between the canyons and the bluffs

Pacific Palisades is where we are based, so a visit here can start early and run as long as the chimney needs. Since the fire, much of our Palisades work is reading what is still standing. A brick stack can look whole from the street and still have a cracked crown, loose top courses or flue tiles that no longer line up, so we work up from the firebox and write each part down before anyone decides to keep it.

CastellammareHuntington PalisadesMarquez KnollsRustic Canyon

Brentwood

east of the Palisades, up to Mandeville Canyon

Many Brentwood houses run two or three fireplaces into one masonry stack, and each flue in that stack has to be read by itself. Our notes say which flue serves which room, so one cracked liner does not get missed because the other two passed.

Brentwood ParkBrentwood GlenMandeville CanyonKenter Canyon

Santa Monica

down the coast from the Palisades

Santa Monica has a lot of brick chimneys on houses built long before current codes, and many sit close enough to the bay to stay damp most of the year. We start at the firebox and work up. On a house near the water, the crown and the mortar joints near the top usually get the longest note on the report.

Ocean ParkSunset ParkNorth of MontanaWilshire Montana

Malibu

west of the Palisades along Pacific Coast Highway

A Malibu chimney takes weather from both sides: salt spray on the beach side and dry brush on the canyon side. We still read it from the base up, but a Malibu visit spends the most time at the top of the stack, where the crown, the cap and the spark arrestor meet that weather first.

Point DumeMalibu ColonyCarbon BeachLas Flores Canyon

More areas

138 more cities, each with its own page

Open the city list →

What the masonry faces here

Fire, quakes and sea air, read from the base up

The structure is the same everywhere: firebox, smoke chamber, flue, stack, crown. What wears on it changes from the bluffs to the canyons to the older streets inland.

After the 2025 fire

In Pacific Palisades and eastern Malibu, a chimney that stood through the heat gets a full structural read before anyone decides to keep it.

Older brick and past quakes

Santa Monica, Beverly Hills and the older streets of Los Angeles have brick chimneys that rode through 1971 and 1994. The flue tiles get a camera look.

Crowns near the water

Damp sea air works on crowns and top joints along the coast. Those get the longest note on a beach-side report, with the cap beside them.

Common Questions

What owners ask about the structure

Masonry, fire damage, quakes and the order we work in. Still unsure? Call us at (424) 266-4564.

It is the order we read the chimney in. We start at the firebox and hearth, move up to the damper and smoke chamber, then the flue liner, and finish on the roof with the stack, crown, flashing and cap. Each part gets its own written note, so you can see which part of the structure is sound and which needs work, instead of one line that says pass or fail.
Sometimes, but it should not be decided from the street. Heat can crack a crown, soften mortar near the top of the stack and shift flue tiles out of line while the brick still looks whole. Before a standing chimney is reused or tied into a rebuilt house, we sweep it, run a Level 2 camera inspection up the flue and read the masonry part by part. The report says what is sound, what needs repair and what would have to be rebuilt.
NFPA 211 calls for an inspection once a year, with a sweep when the inspection shows it is needed. We book the two together and sweep first, so the inspection looks at clean masonry and clean flue tiles. A fireplace used most nights in winter can need a second sweep partway through the season.
Tuckpointing fits when the mortar joints have worn but the brick and the stack are still sound: we grind out the old joints and repoint them with mortar matched to the original. A rebuild comes in when the brick itself is failing, the stack leans or has pulled away from the house, or the crown and top courses are too far gone to hold new mortar. Our report says which one your chimney needs, and why.
The crown is the cap of masonry at the top of the stack, and it sheds water away from the flue and the brick below. Once it cracks, rain gets into the stack every winter and works down through the mortar joints. On houses near the coast in Pacific Palisades, Santa Monica and Malibu, a cracked crown is often the first item on our report.
Yes. Shaking can crack or shift clay flue tiles inside the stack while the outside brick looks fine. The Westside has been through the 1971 San Fernando and 1994 Northridge earthquakes, and many older chimneys here have never had a camera look at the flue since. A Level 2 inspection is how we check.
A masonry fireplace is built on site from brick, block or stone, with a clay or stainless liner. A factory-built unit is a metal firebox and flue set into a framed chase. Each has its own inspection and repair methods, and parts for a factory-built unit come from its maker, so we identify which one you have before planning any work.
It is usually one of a few things: a flue that is too small for the firebox opening, a damper that is stuck partly closed, a blocked flue, or a house sealed so tight that the fire cannot pull enough air. We check the structure first, firebox size against flue size and the smoke chamber shape, then the damper and the flue, and say which one is causing it.
Let the fireplace go cold for a full day, so the firebox and flue are safe to work in. Clear the hearth and a few feet in front of it. If you have an older inspection report, a home sale report or rebuild plans that show the chimney, have them handy, so we can see what was said about the structure before.
Base to Crown

Have your Pacific Palisades chimney read part by part

Tell us what you have noticed, a crack, a stain, a smell, or a fire nearby. We call back to set the visit.

(424) 266-4564

Available 7 AM to 7 PM daily including weekends

Ask for a visit

Leave a name and number and we call back to set the day.

By sending, you agree Cornerstone Chimney Contractors may contact you by call, automated text or email about your request. Consent isn't required to buy. Msg & data rates may apply; reply STOP to opt out. Privacy Policy

Pacific Palisades

Brentwood

Santa Monica

Malibu

Beverly Hills

West Hollywood

Cornerstone Chimney Contractors

Walking the chimney from the hearth to the crown

Four pages for people who meet a chimney through a sale, a referral, a building or a repair list. Each one goes part by part, the way a mason walks a job.

Call (424) 266-4564